Rockwell Automation 8520-MUM 9/Series CNC Mill Operation and Programming Manual Documentation Set - Manual (Page 726)

Paramacros
Chapter 28
28-26
Or if your system has more than 9 axes:
5561 Axis 1 coordinate position 5567 Axis 7 coordinate position
5562 Axis 2 coordinate position 5568 Axis 8 coordinate position
5563 Axis 3 coordinate position 5569 Axis 9 coordinate position
5564 Axis 4 coordinate position 5570 Axis 10 coordinate position
5565 Axis 5 coordinate position 5571 Axis 11 coordinate position
5566 Axis 6 coordinate position 5572 Axis 12 coordinate position
The system installer determines in AMP the name (or word) that is used to
define the axis.
#5081 to 5079 or #5581 to 5592 Active Tool Length Offsets
These are read-only parameters. They correspond to the currently active
tool length offsets (see chapter 20).
5081 Current axis 1 tool length offset. 5087 Current axis 7 tool length offset.
5082 Current axis 2 tool length offset. 5088 Current axis 8 tool length offset.
5083 Current axis 3 tool length offset. 5089 Current axis 9 tool length offset.
5084 Current axis 4 tool length offset.
5085 Current axis 5 tool length offset.
5086 Current axis 6 tool length offset.
Or if your system has more than 9 axes:
5581 Current axis 1 tool length offset. 5587 Current axis 7 tool length offset.
5582 Current axis 2 tool length offset. 5588 Current axis 8 tool length offset.
5583 Current axis 3 tool length offset. 5589 Current axis 9 tool length offset.
5584 Current axis 4 tool length offset. 5590 Current axis 10 tool length offset.
5585 Current axis 5 tool length offset. 5591 Current axis 11 tool length offset.
5586 Current axis 6 tool length offset. 5592 Current axis 12 tool length offset.