Rockwell Automation 8520-MUM 9/Series CNC Mill Operation and Programming Manual Documentation Set - Manual (Page 823)

Using Transfer Line Cycles
Chapter 31
31-21
7. Use the arrow keys to highlight the control as the download
destination and press
[ENTER] , or press [C].
The workstation displays the part program files that are stored in the active
project directory of the workstation:
F1 - File F2 - Project F3 - Application F4 - Utility F5 - Configuration
Proj: TRAN230 Appl: Download Util: File Management
QVO1 QV02 QV03 QV04 QV05 QV06 QV07 QV08 QV09 QV10
QV11 QV12 QV13 QV14 QV15 QV16 QV17 QV18 QV19
Downloading
Use ARROW keys or Type in name. Press ENTER when done, or ESC to cancel.
8. Type in the part program name * to download all of the transfer line
templates to the control, then press
[ENTER] .
When you download a program to the control, the control does not
display a message to indicate that a download is taking place. It may
take several minutes for the control to complete the download. You
may want to go to the directory screen and monitor the download.
When the program finishes downloading, the control updates the size
of the program.