Rockwell Automation 8520-MUM 9/Series CNC Mill Operation and Programming Manual Documentation Set - Manual (Page 70)

Basic Control Operation
Chapter 2
2-46
Time Part Screen Field Definitions
Program -- is the currently active part program, displayed automatically
by the control.
Date -- is the current date setting. To change this setting:
1. Press the {SET DATE} softkey, provided that you have
supervisor-level access.
You are prompted for a new date with a line that displays the current
date setting.
2. Press the [DEL] key to erase the characters displayed.
3. Type in the new date.
You must use one of these formats:
Format: Language:
Month / Day / Year English
Year / Month / Day Japanese
Day / Month / Year German
Time -- is the current 24-hour time setting. It can be changed by pressing
the {SET TIME} softkey, provided that you have supervisor-level access.
You are prompted for a new time with a line that displays the current time
setting. Change the current setting by pressing the
[DEL] key to erase the
characters displayed and then typing in the new time. You must enter
using the format Hours:Minutes:Seconds. For example, 2:00 pm should be
entered as 14:00:00.
Power-on Time/Overall -- indicates the total accumulated time that the
control has been ON. This value is saved in backup memory each time the
control is powered off, so it is restored at its previous value each time the
control is turned ON. To clear this field to zero:
1. Press the {ED PRT INFO} softkey, provided that you have
supervisor-level access.
2. Press the up or down cursor keys to move to this field or the next
field without changing the current value.
3. Enter a Y at the prompt for this field.
4. Press [TRANSMIT] to clear the current value.