Stabilizer cylinder oil flow – SkyTrak 6042 Service Manual User Manual
Page 519
10.13
Model 6042 Legacy
Origin 7/02
Stabil-TRAK™ System
10.5.2
Stabilizer Cylinder Oil Flow
In the FREE PIVOT and FINAL POSITIONING MODES,
oil flow from the stabilizer cylinder will be in one of two
directions; ROD OIL OUT or BASE OIL OUT.
ROD OIL OUT flow will occur when the left side of the
rear axle is lower than the right side (left wheel in a
pothole, or the right wheel passing over an obstruction),
causing the cylinder to extend (Fig. 10 -17, 1).
BASE OIL OUT flow will occur when the right side of the
rear axle is lower than the left (right wheel in a pothole, or
the left wheel passing over an obstruction), causing the
cylinder to compress (Fig. 10-17, 2).
Figure 10-17 Stabilizer Cylinder Rod Movement
1
MH2980
2