SkyTrak 6042 Service Manual - Manual (Page 110)

Boom
3.64 Model 6042 Legacy Origin 7/02
26. Adjust retract chain tension. (Refer to
Section 3.4.4, a. “Component/Assembly
Verification.”)
27. After adjustment is complete, assemble the rear cover
to the rear of the outer boom. At the rear of the outer
boom (Fig. 3-144, 1), position the rear cover (2) in
place. Secure the cover in place with the 5/16" flat
washer (3), saved, 5/16" internal-tooth lockwasher (4),
saved, and thumbscrew (5), saved. Insert the
thumbscrew through the bottom of the outer boom
and into the rear cover. Tighten the thumbscrew
securely to hold the cover in place.
Figure 3-144 Assembly of Rear Cover to Outer Boom
MA9820
3
4
5
1
2