West Control Solutions KS98-1 - Manual (Page 64)

II-3.5 Menu ‘Device’
Device selection
This command is used for selecting the KS 98-1 industrial controller version.
The mask displayed after execution of the command is displayed in Fig.:66.
Selection of the instrument version is possible via the drop-down items.
The order number resulting from the
version selection is displayed on the
bottom left. The inverse procedure
(entry of order number ? display of in-
strument version) is also possible.
For storage of the selected setting, the
selection must be validated by clicking
on “OK”.
Clicking on button “Cancel” will cancel
the current selection.
Instrument parameters
In the input mask (r see Fig.: 67) the settings of KS 98-1 instrument data, address, Baudrate, mains frequency and
language are entered. These data are transmitted to KS 98-1, provided that the instrument version is correct.
Freezing the outputs for download
With this field enabled, the engineering is prepared in such a
way that during the next download to the multi-function unit,
the outputs are frozen in their present status. With the field dis-
abled, the outputs are switched off during this time.
This means that the selected function only becomes
effective after the next download.
Menu reference to the engineering tool 9499-040-82711
II-64 Menu ‘Device’
Fig.: 66
Fig.: 67