West Control Solutions KS98-1 - Manual (Page 58)

Print-out of a section
For printing parts of an engineering, the part to be printed
must be marked in the survey mode. In the standard prin-
ter mask (see Fig.:55 ), click on “Mark” (“Mark” with
Windows 95) before starting the print-out. This is only
possible with graphic print-out. Printing out a section with
drawing header is not possible.
Graphic print-out with frame header
Graphic print-out is possible with or without frame hea-
der. As standard, printing is without frame header. Selec-
tion is in input mask ‘Drawing header’ (r p. 55 Fig.: 42)
In the drawing header, additional information such as operator, date, version no. etc. can be entered. On the left besi -
de the PMA logo, there is free space for a customer-specific logo. The PMA logo can be removed or replaced by a
customer-specific logo.
The frame header is in .wmf format (in ...\PMATools\Et98.xxx\Framexd.wmf) and can be edited with normal graphic pro -
grams(e.g. CorelDraw). However, fields and frames should not be changed to prevent faulty positioning of the texts en -
tered in the engineering tool.
Menu reference to the engineering tool 9499-040-82711
II-58 Menu ‘File’
Fig.: 55