West Control Solutions KS98-1 - Manual (Page 306)

Parameter Description Value Default
x1a in Measured value correction Inp_a, P1 input value
Real
0
x1aOut Measured value correction Inp_a, P1 output value 0
x2a in Measured value correction Inp_a, P2 input value 100
x2aOut Measured value correction Inp_a, P2 output value 100
x1b in Measured value correction Inp_b, P1 input value 0
x1bOut Measured value correction Inp_b, P1 output value 0
x2b in Measured value correction Inp_b, P2 input value 100
x2bOut Measured value correction Inp_b, P2 output value 100
Configuration Description Value Default
Typ_a
Voltage 0...10V 0
0
Voltage -50...1500mV 1
Fail_a
Switched off 0
1
Upscale, Inp_a = x100_a 1
Downscale, Inp_a = x0_a 2
Substitute value, Inp_a = XaFail 3
Xakorr
Measured value correction Inp_a switched off 0
0
Measured value correction Inp_a effective 1
Typ_b
Voltage 0...10V 0
0
Voltage -50...1500mV 1
Fail_b
Switched off 0
1
Upscale, Inp_b = x100_b 1
Downscale, Inp_b= x0_b 2
Substitute value, Inp_b = XbFail 3
Xbkorr
Measured value correction Inp_b switched off 0
0
Measured value correction Inp_b effective 1
a0_a Physical value Inp_a at 0% Real 0
x100_a Physical value Inp_a at 100% Real 100
XaFail Substitute value with sensor error at Inp_a Real 0
Tfm_a Filter time constant of Inp_a in seconds Real 0,5
x0_b Physical value Inp_b at 0% Real 0
x100_b Physical value Inp_b at 100% Real 100
XbFail Substitute value with sensor error at Inp_b Real 0
Tfm_b Filter time constant of Inp_b in seconds Real 0,5
9499-040-82711 Modular I/O - extension-modules
U_INP (analog input card -50...1500mV, 0...10V) III-306