West Control Solutions KS98-1 - Manual (Page 52)

II-2 Installation
II-2.1 Hardware and software prerequisites
For using the engineering tool, the following system prerequistes must be met:
w min. 486 IBM-compatible PC,
w at least 8 MB working memory
w VGA card and suitable monitor (min. screen resolution 800 * 600 pixels)
w hard disk with min. 2,5 MB free memory
w Diskette drive / CD drive (CD-ROM can be copied onto diskettes)
w MS-Windows from version 3.1
(tested: Windows 3.1, Windows for Workgroups 3.11 and Windows 95)
w a free serial interface (COM1 - COM4)
w mouse required, adjustment as a double-key mouse in standard mode for right-handed operators
II-2.2 Software installation
Installation from CD
Place the CD into the CD drive and select the relevant path to install the required software. The CD drive is assumed to
be drive “D” in the example below.
To install ET 98: D:\install\ET98\cd\Setup.exe
To install ET 98plus: D:\install\ET98plus\cd\Setup.exe
To update ET 98: D:\install\ET98plus.UPD\cd\Setup.exe
To upgrade ET 98plus: D:\install\ET98plus.UPG\cd\Setup.exe
Installation from diskette
Generating the installation diskettes.
The software is supplied on a CD-ROM. Installation diskettes can be generated simply by copying the corresponding
folders from the CD to diskettes.
The CD drive is assumed to be drive “D” in the example below.
Generating ET 98 diskettes:
Copy the complete contents of D:\install\ET98\disk1 to ...\disk4 onto four diskettes.
Generating ET 98plus diskettes:
Copy the complete contents of D:\install\ET98plus\disk1 to ...\disk6 onto six diskettes.
Generating an ET 98 update diskette:
Copy the complete contents of D:\install\ET98plus.UPD\disk1 onto a diskette.
Generating ET 98plus upgrade diskettes:
Copy the complete contents of D:\install\ET98plus.UPG\disk1 to ...\disk6 onto six diskettes.
Installation: Place the first diskette into the drive. Click on “Start” (or open Program Manager) and select “Execute…”
(open “File”). Enter ”A:SETUP” (or ”B:SETUP” if your diskette drive is “B:”), and follow the instructions on the screen.
Depending on the language you are working with, not all diskettes might be needed.
Installation 9499-040-82711
II-52 Hardware and software prerequisites