West Control Solutions KS98-1 - Manual (Page 62)

Reorg Block No.
Subsequent deletion of functions produces “gaps” in the list of as-
signed block numbers. The menu item “Reorg Block No.” opens a
dialog box (see Fig.:61 ).
After confirmation with “OK”, all the block numbers are renumbe-
red consecutively. If the default value “0" of the parameter ”Free
block numbers" is changed (e.g. =10), all block numbers are increa-
sed by the specified value, and free spaces are eliminated.
Search
Selecting this menu item opens the
window “Search function” (see
Fig.: 62).
It is possible to search for existing
elements in the different groups.
All possible items are displayed in
a list box, where they can be selec-
ted. If the search is successful, the
corresponding part of the enginee-
ring is displayed, whereby the iden-
tified element appears inverse.
Fig.:62 shows examples of block
names.
Enlarge sheet
With a very extensive engineering, increasing the window greater may be necessary.
Move
Shifts the overall engineering horizontally and vertically.
The x value shifts in horizontal and the y value shifts in vertical direction. Negative values shift left or up. A value of
100 shifts by approx. the size of a small function block.
Add
This command can be used for ad-
ding saved engineerings, inclusive of
all adjusted parameters, to the one
loaded instantaneously. Unless furt-
her block number ranges for defined
functions are free in the current engi-
neering, an error message
(r see Fig.:63 ) is displayed.
Recurrent individual parts can be composed quickly into new engineerings by saving them (e.g. programmer, control -
lers with particular parameter settings, etc.)
Undo (Ctrl + Z)
This command can be used for canceling the last action.
Menu reference to the engineering tool 9499-040-82711
II-62 Menu ‘Edit’
Fig.:61
Fig.:62
Fig.: 63