West Control Solutions KS98-1 - Manual (Page 57)

When clicking on button “new password” in the dialogue
box, the password dialogue is opened (see Fig.: 51).
Enter password, password mode and number of permitted
faulty attempts.
When clicking on button OK, the current engineering is
transmitted into KS 98-1 with password protection.
Thereby, the project stored in the unit so far is overwrit-
ten.
The message shown in Fig.:51 indicates an error in the transmitted data and is used for trouble shooting in case of
technical questions.
The password mode determines the access privilege (? see following table) to the KS 98-1 data via the interface.
Export
After calling this instruction,
you must define whether the
parameters and configuration
data of the individual function
blocks (text file r see Fig.:
52), the graphical engineering
(graphics in .wmf format) or the variables list are to be exported.
Print
After calling up this menu
item, an additional selection is
displayed (r Fig.:53 ).
Graphics
Engineering print-out
Text
Print-out of parameter and configuration data of
individual function blocks (text output r see
Fig.:54 )
Connecting diagram
Print-out of the connecting diagram (see page55 for
connecting diagram)
Subsequently, the standard mask for adjusting prin-
ter functions under Windows is displayed. The pos-
sible settings are described in detail in the
Windows documentation.
The data of the actual project are output in a standard form on the connected printer. The current standard printer ad -
justed under Windows with standard font is used for this purpose (MS Sans Serif 2,8mm).
9499-040-82711 Menu reference to the engineering tool
Menu ‘File’ II-57
Fig.: 51
Fig.: 52
Print
Graphics
Text
Connecting diagram
Fig.: 53
======================================================
Blocknummer:101 Funktion : Analoger Programmgeber
Abtastzeitscheibe=11
------------------------------------------------------
......................................................
......................................................
Short-Parameter =3
WMode = 0
PMode = 1
TPrio = 0
Float-Parameter =1
Wp 0 = 0.000000
Short-Konfigurationen =3
PwrUp = 2
PEnd = 0
Turbo = 0
Float-Konfigurationen =0
Text Parameter =1
Text 1= APROG
Fig.: 54