B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 99)

Airborne Enterprise CLI Reference Manual 99
auth-level
Command auth-level
Arguments [ASCII Text: command] [Integer: 1 - 5]
Security
Level
Read: 3 (config)
Write: 5 (manuf)
Device Type All
Default [blank]
Description Changes the required authentication (user) level for a given command.
The command requires two arguments:
command
This identifies the Command Line Interface (CLI) command whose authentication
level will be changed by the command.
Supported commands:
reset
level
Identifies the authentication level required to execute the command.
0 = connectionless (L0)
1 = connection, not logged in (L1)
2 = data (L2)
3 = config (L3)
4 = OEM (L4)
5 = Manufacturing (manuf) (L5)
The value cannot be lower than the default value for the command.

Changing the commands authentication level will restrict use of the command by users
who do not have the required authentication levels for the command.