B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 178)

178 Airborne Enterprise CLI Reference Manual
ppp-idle-timeout
Command ppp-idle-timeout
Arguments [Integer]
Security
Level
3 (config)
Device Type All
Default 0
Description Configures the PPP Idle Timeout value of the PPP Serial 1 (UART1) interface of the module if PPP is
enabled.
The timeout value is in the range of 0 - 600 seconds and is the number of seconds of inactivity after
which the PPP connection will terminate and restart.
A value of 0 disables the idle timeout function. The module must be restarted for this parameter to
take effect.
ppp-idle-timeout-p2
Command ppp-idle-timeout-p2
Arguments [Integer]
Security
Level 3 (config)
Device Type All
Default 0
Description Configures the PPP Idle Timeout value of the PPP Serial 2 (UART2) interface of the module if PPP is
enabled.
The timeout value is in the range of 0 - 600 seconds and is the number of seconds of inactivity after
which the PPP connection will terminate and restart.
A value of 0 disables the idle timeout function. The module must be restarted for this parameter to
take effect.