B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 220)

220 Airborne Enterprise CLI Reference Manual
wl-assoc-retries
Command wl-assoc-retries
Arguments [Integer] Range: 0 - 32
Security
Level
3 (config)
Device Type All
Default 3
Description The number of times to try an association attempt before backing off.
Range 0 - 32 (default 3)
wl-band-pref
Command wl-band-pref
Arguments auto | 2.4 | 5
Security
Level
3 (config)
Device Type All
Default auto
Description Configures the preferred radio operation frequency band.
This command is not applicable in Access Point mode. The wl-chan will dictate which wl-band-pref will
be used (2.4 or 5).
In AdHoc modes, the wl-chan takes precedence and the wl-band-pref may be adjusted to include the
band of the selected channel.
auto Scan both the 2.4 GHz and 5 GHz bands for access points.
2.4 Scan the 2.4 GHz band only.
5 Scan the 5 GHz band only.
wl-beacon-int
Command wl-beacon-int
Arguments [Integer]
Security
Level
3 (config)
Device Type All
Default 100 (ms)
Description Beacon interval for "wl-type m" (Access Point) or "wl-type p" (AdHoc) modes.
Range is 10 – 65535 milliseconds.