B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 149)

Airborne Enterprise CLI Reference Manual 149
ftp-server
Command ftp-server
Arguments enable | disable | off
Security
Level
3 (config)
Device Type All
Default enable
Description Enables or disables the access to the internal FTP server.
enable Internal FTP server is enabled on all ports.
disable Internal FTP server is disabled on all ports.
off Internal FTP server in not loaded.
The FTP server is used for delivery of certificates, configuration files and device firmware. When
disabled or not loaded these items cannot be delivered to the device server.
ftp-server-address
Command ftp-server-address
Arguments [Valid IP address] | [ACSII Text: FTP URL]
Security
Level
3 (config)
Device Type All
Default
Description This value defines the IP address or URL of the target FTP server used for firmware, certificate or
configuration file download.
The IP address format follows the standard ASCII format XXX.XXX.XXX.XXX, where XXX = 1-254.
The URL must be a valid and entered using ASCII text. The maximum length of the URL is 127
characters.
Must be specified in order for the following commands to function correctly:
update ftp
get-cert
get-cfg