B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 101)

Airborne Enterprise CLI Reference Manual 101
br-client-mac
Command br-client-mac
Arguments [ASCHEX: 6 Bytes]
Security
Level
3 (config)
Device Type Ethernet
Default
Description If eth-role is bridge and wl-dhcp is 0, pre-configures the MAC address of the Bridge Client device
attached to the Ethernet port.
The input is 6 bytes ASCHEX with no colons e.g. 000B280040AA.
The bridge will reconfigure itself if the client device is not, in fact, using this MAC address.
This setting is not applicable when the device is in Access Point mode (wl-type m).

Changing the MAC value must be done with caution. Only a known unique MAC value
should be used.