Subject-match, Subject-match2 – B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual User Manual
Page 206

206
Airborne Enterprise CLI Reference Manual
subject-match
Command
subject-match
Arguments
[ASCII Text String]
Security
Level
3 (config)
Device Type All
Default
[blank]
Description
Substring to be matched against the subject of the authentication server certificate. If this string is set,
the server certificate is only accepted if it contains this string in the subject. The subject string is in
following format: /C=US/ST=CA/L=San Francisco/CN=Test AS/[email protected]
Example: EMAIL:[email protected]
Example: DNS:server.example.com;DNS:server2.example.com
Following types are supported: EMAIL, DNS, URI
subject-match2
Command
subject-match2
Arguments
[ASCII Text String]
Security
Level
3 (config)
Device Type All
Default
[blank]
Description
Substring to be matched against the subject of the authentication server certificate. If this string is set,
the server certificate is only accepted if it contains this string in the subject. The subject string is in
following format: /C=US/ST=CA/L=San Francisco/CN=Test AS/[email protected]
Example: EMAIL:[email protected]
Example: DNS:server.example.com;DNS:server2.example.com
Following types are supported: EMAIL, DNS, URI
The string is used during the inner authentication phase.