B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 218)

218 Airborne Enterprise CLI Reference Manual
wl-acl-mac
Command wl-acl-mac
Arguments [ASCII Text string]
Security
Level
3 (config)
Device Type All
Default blank
Description Set access control policy MAC address for Access Point mode.
The argument is the MAC address that will be used in conjunction with the wl-acl-policy field to perform
basic MAC level access control.
The format of this string should be xx:xx:xx:xx:xx:xx, where the xx's are hexadecimal byte values
composing a valid MAC address.
If desired, the wildcard ('*') character can be used as one or more of the xx's. For example, to allow
only clients with a MAC address starting with 00:0B:28 to associate, the wl-acl-policy should be 'allow',
and this MAC address should be '00:0B:28:*:*:*'.
wl-acl-policy
Command wl-acl-policy
Arguments disable | allow | deny
Security
Level 3 (config)
Device Type All
Default disable
Description Set access control policy for Access Point mode.
disable Disable the access control policy.
allow Set access control policy to ALLOW.
deny Set access control policy to DENY.