beautypg.com

Arp-reachable-time, Arp-staleout-time – B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual User Manual

Page 98

background image

98

Airborne Enterprise CLI Reference Manual

arp-reachable-time

Command

arp-reachable-time

Arguments

[integer]

Security

Level

3 (config)

Device Type All

Default

120

Description

The average amount of time before sending an ARP to each device in the ARP table. The actual rate is

a random amount of time between 0.5 and 1.5 times this value.

Value has the range of 1-254 seconds. The default time is 120 seconds.

The device server requires a restart or power cycle for this parameter change to take effect.

arp-staleout-time

Command

arp-staleout-time

Arguments

[integer]

Security

Level

3 (config)

Device Type All

Default

120

Description

The amount of time since the last observation of the IP address before scheduling that entry for

removal from the device severs internal ARP table.

Value has the range of 1-254 seconds. The default time is 120 seconds.

The device server requires a restart or power cycle for this parameter change to take effect.