B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 180)

180 Airborne Enterprise CLI Reference Manual
ppp-remote-ip
Command ppp-remote-ip
Arguments [IPAddress]
Security
Level
3 (config)
Device Type All
Default 192.168.3.100
Description Configures the remote IP address of the PPP Serial 1 (UART1) interface of the module if PPP is enabled.
This is the address that the remote device on the PPP connection will adopt.
The module must be restarted for this parameter to take effect.
ppp-remote-ip-p2
Command ppp-remote-ip-p2
Arguments [IPAddress]
Security
Level
3 (config)
Device Type All
Default 192.168.4.1
Description Configures the remote IP address of the PPP Serial 2 (UART2) interface of the module if PPP is enabled.
This is the address that the remote device on the PPP connection will adopt.
The module must be restarted for this parameter to take effect.