B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 61)

Airborne Enterprise CLI Reference Manual 61
Table 16 - EAP-TLS/MSCHAPv2 Configuration
Command Description
wl-security tls Sets the EAP authentication process to be used.
eap-ident [client username from
RADIUS server] Sets the username/EAP Identity for the client.
There must be a valid username on the
RADIUS server that matches this name.
Replace the [client username from
RADIUS server]
with the user name (no
parenthesis).
priv-key-password [client private
key password] Sets the password for the client private key file.
This must be the password on the RADIUS
server that matches the key used to build the
private key file. Replace the [client
private key password]
with the password
for the private key file (no parenthesis).
ca-cert-filename [CA root cert
name].pem Identifies the CA root certificate name to be
used. Replace [CA root cert name].pem
with the required filename (no parenthesis).
The certificate must be saved to the module
with the name identified by this command.
client-cert-filename [client cert
name].pem Identifies the client certificate name to be
used. Replace [client cert name].pem
with the required filename (no parenthesis).
The certificate must be saved to the module
with the name identified by this command.
priv-key-filename [client private
key name].pem Identifies he client private key file to be used.
Replace [client private key name].pem
with the required filename (no parenthesis).
The private key file must be saved to the
module with the name identified by this
command.
Table 17 - PEAPv0/EAP-MSCHAPv2 Configuration
Command Description
wl-security peap Sets the EAP authentication process to be used.
eap-ident [client username from
RADIUS server] Sets the username/EAP Identity for the client.
There must be a valid username on the
RADIUS server that matches this name.
Replace the [client username from
RADIUS server]
with the user name (no
parenthesis).
eap-password [Password for client
username] Sets the password for the client. This must be
the password on the RADIUS server that
matches the username. Replace the
[Password for client username]
with
the password for the account (no parenthesis).