B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 229)

Airborne Enterprise CLI Reference Manual 229
wl-noise
Command wl-noise
Arguments [None]
Security
Level
2 (data)
Device Type All
Default
Description
Displays the current Noise value (in dBm).
If the module is not associated, it will display -99.
wl-rate
Command wl-rate
Arguments 0 | 1 | 2 | 5.5 | 11 | 6 | 9 | 12 | 18 | 24 | 36 | 48 | 54
Security
Level
3 (config)
Device Type All
Default 0 (auto – selects the best highest rate)
Description Configures the maximum wireless data rate for the Module (in Mbps).
For rates above 1 Mbps, the Module may fall back to a lower rate. Lower data rates may result in better
range.
A setting of „0‟ will allow WLxN/APxN modules to also use 802.11n rates (6.5 | 13 | 19.5 | 26 | 39 | 52 |
58.5 | 65).