B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 236)

236 Airborne Enterprise CLI Reference Manual
wl-sleep-timer-p2
Command wl-sleep-timer-p2
Arguments [integer]
Security
Level
3 (config)
Device Type UART | Serial | SPI
Default 0
Description Configures he inactivity time (in seconds) on Serial 2 (UART2) interface before the radio will transition to
sleep mode. Data transfer to and from the UART will reset the timer.
The timer has a range of 0 – 300 seconds.
A value of zero (0) disables the wl-sleep-timer-p2.
wl-specific-scan
Command wl-specific-scan
Arguments 0 | 1
Security
Level
3 (config)
Device Type All
Default 0
Description Controls how the module scans for Access Points.
0 Use Broadcast Probes to attempt to find an Access Point.
1
Use Directed Probes to attempt to find an Access Point. In this mode only
AP‟s with matching SSID‟s to the module will be probed.
Some network administrators disable responses to Broadcast Probes on the Access Point. To support
scanning on these networks set wl-specific-scan 1.