B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 203)

Airborne Enterprise CLI Reference Manual 203
startup-msg
Command startup-msg
Arguments 0 | 1
Security
Level
3 (config)
Device Type All
Default 0 (disable)
Description Displays a start-up message, defined by startup-text, once the device server has completed a restart or
power cycle.
0
Disables the start-up text. No message will be displayed after a restart or
power cycle.
1
Enables the start-up text. The startup-msg text message will be displayed
after a restart or power cycle.
Once the message is displayed the device server is available for interaction on the CLI interface.
startup-text
Command startup-text
Arguments [ASCII Text]
Security
Level
3 (config)
Device Type All
Default “Ready”
Description ACSII Text message that is displayed when the device server has completed a restart or power cycle.
Once displayed the device is available for interaction using CLI.
The ASCII text message can be a maximum of 31 characters terminated by /.
For the message to be displayed startup-msg must be enabled.