B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 177)

Airborne Enterprise CLI Reference Manual 177
post-led
Command post-led
Arguments enable | disable
Security
Level
3 (config)
Device Type All
Default enable
Description Controls the function of the GPIO pin (F0) used for the LED_POST, pin 25.
enable
Defines the output of GPIO pin F0 as the POST. The POST LED will turn on when the
Airborne adapter has successfully completed its power on self-test.
disable Defines the GPIO pin F0 for use as a general purpose digital I/O pin.
The LED_CON must be disabled for io-dir-f, io-pullup-f and io-write to affect GPIO F0.