B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 127)

Airborne Enterprise CLI Reference Manual 127
eap-phase2
Command eap-phase2
Arguments auth=MSCHAPV2 | autheap=MSCHAPV2 | autheap=MD5
Security
Level
3 (config)
Device Type All
Default [blank]
Description Phase2 (inner authentication used with TLS tunnel) parameters.
auth=MSCHAPV2
Sets the inner encryption to MSCHAPv2.
Required for EAP-PEAPv0 or EAP-PEAPv1.
autheap=MSCHAPV2
Sets the inner encryption to MSCHAPv2.
Required for EAP-TTLS/MSCHAPv2
autheap=MD5
Sets the inner encryption to MD5.
Required for EAP-TTLS/MD5.
This is a string with field-value pairs, e.g., "auth=MSCHAPV2" for EAP-PEAP or autheap=MSCHAPV2
autheap=MD5" for EAP-TTLS).
The following certificate/private key fields are used in inner Phase2 authentication when using EAP-
TTLS or EAP-PEAP:
ca-cert2-filename
client-cert2-filename
priv-key2-filename
priv-key2-password
dh-parm2-filename
subject_match2
altsubject_match2