B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 212)

212 Airborne Enterprise CLI Reference Manual
update
Command update
Arguments [blank] | ftp
Security
Level
3 (config)
Device Type All
Default [blank]
Description Used to update of the Airborne Device Server firmware. Supports firmware delivery by both FTP and
Xmodem transfer.
 Only firmware authorized by B&B Electronics should be used with this command. Any
attempt to use an alternative image will void the modules warranty.
FTP delivery requires a valid FTP server configuration to have been configured prior to the attempt to
update the firmware.
[blank]
The module expects an Xmodem transfer to be initiated by a host on one of
the available ports.
ftp
The module will use the configured FTP settings and attempt to download
the firmware update image.
The ftp-filename must match the firmware image being down loaded, e.g.
ftp-filename Veyron101.img

CRITICAL: When updating any firmware, power must be maintained during the entire
update process. Removal or interruption of the power supply may cause a corruption of
the firmware update and cause the module to stop functioning. If this occurs please
contact B&B Electronics Technical Support.