B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 202)

202 Airborne Enterprise CLI Reference Manual
ssh-trust
Command ssh-trust
Arguments 0 | 1
Security
Level
3 (config)
Device Type All
Default 0
Description Configures the SSH Client on the module to automatically trust the MD5 finger print of any server to
which a PASS connection is made. When enabled all MD5 fingerprints are accepted and stored in the SSH
Trusted Host File.
0 Disabled and will not automatically trust MD5 finger prints from connected servers.
1 Enables automatic trusting of MD5 finger prints from connected servers.
This option should only be enabled for the initial connection between devices in a network.
The parameter defaults to 0 (disabled) and is not persistent across restarts or power cycles. This
parameter is not saved with a commit.
Any trusted MD5 fingerprints must be saved by using a commit. Once committed they will be recognized
during any subsequent connection to the trusted server.