B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 201)

Airborne Enterprise CLI Reference Manual 201
ssh-keysize
Command ssh-keysize
Arguments [integer]
Security
Level
Read: 3 (config)
Write: 4 (OEM)
Device Type All
Default 1024
Description Defines the size of the SSH RSA key.
The key length must be from 1024-2048 and MUST be divisible by 8.
The default is 1024.

If you change the ssh-keysize and SSH keys already exist, you will be prompted to
remove the existing keys using clear ssh-key and to reissue ssh-keygen to
generate new SSH keys
This command is used by ssh-keygen.
ssh-port
Command ssh-port
Arguments enable | disable | off
Security
Level
3 (config)
Device Type All
Default enable
Description Enables or disables access to the SSH port (Port 22) via the wireless interface.
enable Enable SSH access via the wireless and Ethernet ports.
disable Disable SSH access via the wireless port. Access via Ethernet interface is enabled.
off Disable SSH access via all network ports. SSH server is not loaded at restart.
Configuring ssh-port off is preferred to ssh-port disable for controlling the access to the SSH
port.