B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 256)

256 Airborne Enterprise CLI Reference Manual
20.0 Error Codes
When the Airborne Device Server firmware encounters an error during operation the
connected interfaces will display one of the following error codes in Table 41. The
identified code will aid in isolation of the cause of the error.
Table 41 – Error Codes
Error Code Description
0xF800 An unknown error has occurred.
0xF801 Invalid parameter.
0xF802 Command not recognized.
0xF803 Operation timed out.
0xF804 Invalid character.
0xF805 Insufficient memory.
0xF806 Not authorized.
0xF807 Parameter length invalid.
0xF808 Command not implemented.
0xF809 File not found.
0xF80A Invalid port.
0xF80B Port busy.
0xF80C Invalid user or password.
0xF80D Timeout waiting for update file.
0xF80E Update file error.
0xF80F Update cancelled.
0xF810 Invalid XMODEM Packet Sequence.
0xF811 Processing another inquiry.
0xF812 Unable to connect to server.
0xF813 Command not allowed in script.
0xF814 Join failed
0xF815 Join in progress
0xF816 Port assigned to another service
0xF818 Socket Busy.
0xF819 Insufficient socket memory.
0xF81A No IP route.
0xF81B Socket not connected.
0xF81C No TCP data.
0xF81D DNS: Transaction Failed.
0xF81E DNS: Hostname not found.
0xF81F DNS: internal error.
0xF820 DNS: invalid hostname.
0xF821 DNS: Server not configured.