B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 198)

198 Airborne Enterprise CLI Reference Manual
serial-port / serial-port-p1
Command serial-port | serial-port-p1
Arguments enable | disable
Security
Level
3 (config)
Device Type All
Default Determined by the device type configuration
Description Enables or disables the Serial Port 1 (UART1).
enable Enable the Serial Port 1 (UART1).
disable Disable the Serial Port 1 (UART1)
Disabling the serial port can save power and is recommended during normal operation of the device, if
the port is not in use.
Use of the –p1 suffix is optional.
serial-port-p2 /serial-port2
Command serial-port-p2 | serial-port2
Arguments enable | disable
Security
Level
3 (config)
Device Type All
Default Determined by the device type configuration
Description Enables or disables the Serial Port 2 (UART2).
enable Enable the Serial Port 2 (UART2).
disable Disable the Serial Port 2 (UART2)
Disabling the serial port can save power and is recommended during normal operation of the device, if
the port is not in use.