B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 183)

Airborne Enterprise CLI Reference Manual 183
put-cert
Command put-cert
Arguments [ASCII text: filename.extension]
Security
Level
3 (config)
Device Type All
Default none
Description Will cause the device server to wait for an X-modem file transfer of certificate from the host device
connected to the serial interface.
Once the download is complete it is necessary for the save command to be issued, this will cause the
certificate to be stored to the device server.
It is required that the host use Xmodem 1K or Xmodem 1K-CRC.
This command is supported via the serial interface or a telnet session.
put-cfg
Command put-cfg
Arguments user_config.txt | oem_config.txt
Security
Level
3 (config)
Device Type All
Default none
Description Will cause the device server to wait for an Xmodem file transfer of the configuration file from the host
device connected to the serial interface.
Once the download is complete it is necessary for the save command to be issued, this will cause the
configuration file to be stored to the device server.
There are two valid configuration files that may be down loaded:
user_config.txt
User configuration file. This file contains the user configuration
commands and parameters.
oem_config.txt
OEM default configuration file. This contains the OEM default settings for
the device server. These settings are installed upon the issuing of a
factory reset command or hardware factory reset input.
user_enc_config.uue
Encrypted user configuration file. This file contains sensitive user
configuration parameter names and values. See cfg-encrypt for
details.
It is required that the host use Xmodem 1K or Xmodem 1K-CRC.
This command is supported via the serial interface or a telnet session.