B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 119)

Airborne Enterprise CLI Reference Manual 119
dev-type
Command dev-type
Arguments none
Security
Level
0 (all)
Device Type All
Default
Description Identifies the Airborne device type. The device type specifies the hardware configuration and the
functionality of the module.
device-type
Command device-type
Arguments uart | ethernet | serial | spi | industr-ethernet | industr-serial | bridge | access-point
Security
Level
Read: 0 (all)
Write: 3 (config)
Device Type All
Default Determined by the model number of the device
Description Configures the personality of the Airborne module and configures ports to preset configurations.
uart UART module personality
ethernet Ethernet Router module personality
serial DirectSerial module personality
spi SPI module personality
industr-ethernet Industrial Ethernet personality
industr-serial Industrial Serial personality
bridge Ethernet Client Bridge personality
access-point Access Point personality
The port configuration for each personality is preconfigured (enabled/disabled) and consist of these
ports: UART1, UART2, Ethernet, Debug, and Wireless.

The SPI personality removes the availability of the UART1 and Ethernet ports since pins
required for the SPI interface are used by these ports.
Not all ports are available to boxed products.