B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 257)

Airborne Enterprise CLI Reference Manual 257
Error Code Description
0xF823 Header Failure
0xF82D
Mixed use of Legacy Escape command and Newer Escape
commands.
0xF82E TCP outbound configuration invalid.
0xF832 SPI: read failed.
0xF833 SPI: write failed.
0xF834 SPI: dir failed.
0xF835 SPI: GPIO pin reserved for SPI.
0xF837 Invalid flow control type.
0xF838 File write error.
0xF839 Error applying configuration.
0xF83A Error parsing command line options.
0xF83B Missing ftp-server-address.
0xF83C Missing ftp-user.
0xF83D Missing ftp-password.
0xF841 Error opening serial device.
0xF842 Error allocating host memory.
0xF843 Unable to set up TCP server socket.
0xF844 Unable to set up UDP server socket.
0xF845 Unable to accept TCP connection.
0xF846 Error reading host data.
0xF847 Error writing host data.
0xF848 Error reading TCP data.
0xF849 Error writing TCP data.
0xF84A Error reading UDP data.
0xF84B Error writing UDP data.
0xF84C Error updating firmware
0xF84D Error generating SSH key.
0xF84E SSH key already exists.
0xF84F Error writing GPIO pin
0xF850 Error reading GPIO pin
0xF851 Error setting GPIO pin direction
0xF852 Host not trusted.
0xF853 Disconnected from server.
0xF854 Could not create temp file – disk may be full
0xF855 Missing ftp-filename.
0xF856 Error during FTP transfer.
0xF857 ftp-user or ftp-password incorrect.
0xF858 Cannot connect to FTP server.
0xF859 File not found on FTP server.
0xF85A Ethernet port not enabled.