B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 100)

100 Airborne Enterprise CLI Reference Manual
blink-post-led
Command blink-post-led
Arguments on | off
Security
Level
3 (config)
Device Type All
Default [blank]
Description Changes the state of the POST LED. This function allows the identification of the unit being talked to by
the network system, through physical indicator.
on Causes the POST LED output to blink
off Causes the POST LED to return to normal operation
bit-rate / bit-rate-p1
Command bit-rate | bit-rate-p1
Arguments 300 | 600 | 1200 | 2400 | 4800| 9600 | 14400 | 19200 | 28800 | 57600 | 115200 | 230400 | 460800 |
921600
Security
Level
3 (config)
Device Type UART | Serial | Ethernet
Default 9600
Description Sets the bit-rate of serial port 1 (UART1) in bits per second.
Use of the –p1 suffix on the command is optional.
bit-rate-p2
Command bit-rate-p2
Arguments 300 | 600 | 1200 | 2400 | 4800| 9600 | 14400 | 19200 | 28800 | 57600 | 115200 | 230400 | 460800 |
921600
Security
Level 3 (config)
Device Type UART | Serial | Ethernet
Default 9600
Description Sets the bit-rate of serial port 2 (UART2) in bits per second.