B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 78)

78 Airborne Enterprise CLI Reference Manual
14.0 FTP Configuration
The module includes an FTP client capable of uploading files to the device. The
embedded FTP client is capable of authenticating with a network based FTP server and
transferring a file to the device using the FTP protocol.
Table 27 - FTP Configuration Commands
Command Description
ftp-server-address This defines the IP address of the target FTP server. The address must be in
the standard format XXX.XXX.XXX.XXX.
Where XXX must have an integer value between 0 and 255. The resultant Ip
address must not be 0.0.0.0.
ftp-server-path This defines the directory path for the subdirectory that contains the target
certificate to be downloaded, from the default directory of the ftp-user.
This does not need to be set if the file is in the default directory for the
specified ftp-user.
ftp-user
Defines the username for the FTP account, associated to the FTP server
defined by ftp-server-address.
ftp-password Defines the password for the FTP account, associated to the FTP server
defined by ftp-server-address.
ftp-filename
Defines the name of the certificate or private key file to be uploaded or
downloaded. The file extension must be included.
The filename does not support wildcards.
To use this function it is necessary to configure the internal FTP Client with the necessary
information for the file upload, the related commands can be seen in Table 27. Once the
FTP configuration is applied all that is needed is the filename, as listed on the FTP server
target directory, to be updated.
The FTP client supports upload of Certificates, Private Keys, Configuration files and
Firmware. Separate commands determine the file type to be uploaded; Table 28 shows
the different commands. All of these commands require the correct configuration of the
FTP server parameters before being used; these parameters are described in Table 27.
Table 28 - FTP Upload Commands
Command Description
get-cert Uploads Certificates and Private keys from the designated FTP server.
Requires the Certificate or Private Key file name as a parameter.
get-cfg Uploads user or OEM configuration files from the designated FTP server.
Requires the Certificate or Private Key file name as a parameter.
update ftp
Uploads Airborne Device Server firmware image from the designated FTP
server.