B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 136)

136 Airborne Enterprise CLI Reference Manual
eth-dhcp-fbgateway
Command eth-dhcp-fbgateway
Arguments [ASCII Text]
Security
Level
3 (config)
Device Type Ethernet
Default 0.0.0.0
Description Defines the gateway address used when DHCP fallback configuration is used by the Ethernet port.
This setting requires that eth-dhcp-fb is enabled and the eth-dhcp-acqlimit is not 0 (zero).
The default setting is 0.0.0.0.
eth-dhcp-fbip
Command eth-dhcp-fbip
Arguments [ASCII Text]
Security
Level 3 (config)
Device Type Ethernet
Default 0.0.0.0 – SPI and Ethernet, 192.168.10.1 – UART, Serial
Description Defines the IP address used when DHCP fallback configuration is used by the Ethernet port.
This setting requires that eth-dhcp-fb is enabled and the eth-dhcp-acqlimit is not 0 (zero).
The default setting is 0.0.0.0 for SPI and Ethernet and 192.168.10.1 for UART and Serial devices.