B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 121)

Airborne Enterprise CLI Reference Manual 121
discover
Command discover
Arguments none
Security
Level
3 (config)
Device Type All
Default
Description Initiates discovery of and lists all Airborne device servers. The device servers must be on the same
physical network as the device that initiated the process.
A typical response will be:
Device Name IP Address MAC Address Device Type FW Ver
-----------------------------------------------------------------------------------------
Veyron_1 192.168.1.108 000B6B7784C5 AIRBORNE 1.02M
This process may take several seconds to respond.

The discovery process uses UDP broadcasts (255.255.255.255) for the discovery
protocol, if your network infrastructure does not allow UDP broadcasts the discovery
process will not work. In this case no devices will be discovered.
disk-free
Command disk-free
Arguments none
Security
Level
3 (config)
Device Type All
Default
Description Displays the approximate free space available on the internal flash disk in bytes.