B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 133)

Airborne Enterprise CLI Reference Manual 133
eth-dhcp-client
Command eth-dhcp-client
Arguments [ASCII Text]
Security
Level
3 (config)
Device Type All
Default AirborneXXXXXX
Description Configures the DHCP Client Host Name String to use in the DHCP requests for the Ethernet interface.
Up to 31 ASCII characters.
Default is AirborneXXXXXX where XXXXXX are the last six hexadecimal digits of the Module's Ethernet
MAC address.
eth-dhcp-clients
Command eth-dhcp-clients
Arguments
Security
Level
3 (config)
Device Type Ethernet
Default
Description Displays a list of the leased IP addresses on the Ethernet interface. The client to which the address has
been leased is identified by its MAC address.
The following is an example of the output from this command:
Client Address DHCP Address
00:21:70:76:96:4F 192.168.2.100
00:21:70:76:EF:10 192.168.2.101
00:0B:6B:77:84:C5 192.168.2.102
It is important to note that all device listed by the command may not be available. The list provides leased
addresses only and does confirm availability of the device prior to the list being displayed.