B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 185)

Airborne Enterprise CLI Reference Manual 185
putexpect
Command putexpect
Arguments [integer1] [integer2] [ASCHEX1] [ASCHEX2]
Security
Level
2 (data)
Device Type All
Default
Description Performs a binary data transfer to a target server or to the CLI Session on the Serial 1 (UART1)
interface.
The operation waits for bytes of returned data or times out after seconds or the
terminator is recognized.
Excess bytes are discarded. After the command completes, the connection remains in CLI Mode.
The command can be issued from a LAN application (serial in Listen Mode) or from a Serial Host
application.
integer1 Maximum number of bytes: range 0 – 1800
Integer2 Timeout in seconds. 32 bit unsigned.
ASCHEX1 Data to be sent, up to maximum length of the command line.
ASCHEX2 Terminator, up to 16 bytes in length.
putexpect-any
Command putexpect-any
Arguments [integer1] [integer2] [ASCHEX1] [ASCHEX2]
Security
Level
2 (data)
Device Type All
Default
Description Performs a binary data transfer to a target server or to the CLI Session on a serial interface.
The operation waits for bytes of returned data or times out after seconds or the
terminator is recognized.
Excess bytes are discarded. After the command completes, the connection remains in CLI Mode.
The command can only be issued from a LAN application and uses the first serial interface in Listen mode.
integer1 Maximum number of bytes: range 0 – 1800
Integer2 Timeout in seconds. 32 bit unsigned.
ASCHEX1 Data to be sent, up to maximum length of the command line.
ASCHEX2 Terminator, up to 16 bytes in length.