B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 155)

Airborne Enterprise CLI Reference Manual 155
http-port
Command http-port
Arguments disable | enable
Security
Level
3 (config)
Device Type All
Default enable
Description Enables or disables access to the modules web browser via the wireless interface.
When enabled the module will transfer all HTTP traffic on the defined listening port (wl-http-port)
to its internal HTTP server, when disabled all HTTP traffic will be forwarded to the wired interface.
enable Enable HTTP access via the wireless and Ethernet ports.
disable Disable HTTP access via the wireless port. Access via Ethernet interface is enabled.
off Disable HTTP access via all network ports.
Configuring http-port off is preferred to http-port disable for controlling the access to the
wireless port.

Disabling the http-port will prevent any web interface connections from being accepted
by the module on the wireless interface, limiting connections for web interface sessions
to the wired interface only. This will restrict the management options available.
This can be overcome by establishing a port forwarding rule that redirects incoming
wireless traffic directed to a defined port on the wireless interface to the gateway
address of the module using the HTTP port defined by wl-http-port.