B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 151)

Airborne Enterprise CLI Reference Manual 151
ftp-user
Command ftp-user
Arguments [ASCII text: username]
Security
Level
3 (config)
Device Type All
Default
Description Defines the username for the FTP account, associated to the FTP server defined by ftp-server-address.
Must be specified in order for the following commands to function correctly:
update ftp
get-cert
get-cfg
Please note that anonymous user credentials are not supported.
get-cert
Command get-cert
Arguments [ASCII Text – filename]
Security
Level
3 (config)
Device Type All
Default [blank]
Description Will cause the device server to retrieve a certificate for the FTP server identified in the parameters
defined by the following commands:
ftp-server-path
ftp-server-address
ftp-user
ftp-password
ftp-filename
Once the download is complete it is necessary for the save command to be issued, this will cause the
certificate to be stored to the device server.
For the Serial/UART/SPI device servers it is required that the device is associated and authenticated
with a network and has a valid IP address before issuing this command.
The Ethernet Bridge server supports the use of this command over the wired interface.