B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 169)

Airborne Enterprise CLI Reference Manual 169
ntp-server-address
Command ntp-server-address
Arguments [ASCII Text string]
Security
Level
3 (config)
Device Type All
Default pool.ntp.org
Description The IP address or the fully qualified name of the Network Time Protocol server.
Must be specified in order to use "ntp-startup-sync" or "ntp-refresh".
ntp-startup-sync
Command ntp-startup-sync
Arguments enable | disable
Security
Level 3 (config)
Device Type All
Default disable
Description Enables or disables the synchronization with the Network Time Protocol service at startup of the module.
enable Enable NTP sync at startup.
disable Disable NTP sync at startup.