B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 230)

230 Airborne Enterprise CLI Reference Manual
wl-retry-time / wl-retry-time-p1
Command wl-retry-time | wl-retry-time-p1
Arguments [integer]
Security
Level
3 (config)
Device Type Serial, UART
Default 60
Description Configures the interval, in seconds, between attempts to establish a TCP connection with a Network
Server. Used by Serial 1 (UART1) interface when the serial default mode is pass.
The range for the parameters is 0 – 4,294,967,295 seconds (32 bit binary unsigned).
Use of the –p1 suffix is optional.
wl-retry-time-p2
Command wl-retry-time-p2
Arguments [integer]
Security
Level 3 (config)
Device Type Serial, UART
Default 60
Description Configures the interval, in seconds, between attempts to establish a TCP connection with a Network
Server. Used by Serial 2 (UART2) interface when the serial default mode is pass.
The range for the parameters is 0 – 4,294,967,295 seconds (32 bit binary unsigned).