B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 252)

252 Airborne Enterprise CLI Reference Manual
wl-wins1
Command wl-wins1
Arguments [IP Address]
Security
Level
3 (config)
Device Type All
Default 0.0.0.0
Description This command has been deprecated see wins-server1.
Configures the Primary WINS Server Address. This value is used for WINS lookups, if the lookup fails
using the value from wl-dns1 or wl-dns2. If the DHCP Client is enabled, the wl-wins1 value will be
updated (if the DHCP Server provides one) during the DHCP cycle.
Default is 0.0.0.0.
wl-wins2
Command wl-wins1
Arguments [IP Address]
Security
Level 3 (config)
Device Type All
Default 0.0.0.0
Description This command has been deprecated see wins-server2.
Configures the Secondary WINS Server Address. This value is used for WINS lookups, if the lookup fails
using the value from wl-dns1 or wl-dns2. If the DHCP Client is enabled, the wl-wins1 value will be
updated (if the DHCP Server provides one) during the DHCP cycle.
Default is 0.0.0.0.