B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 172)

172 Airborne Enterprise CLI Reference Manual
pass-any
Command pass-any
Arguments [none]
Security
Level
2 (data)
Device Type Serial, UART
Default [blank]
Description Creates a data bridge between the wireless and one of the serial interfaces. The command can only be
issued form a telnet connection and will create a data tunnel with the first serial interface (UART) found
that is in the listen mode.
If both serial interfaces are in listen mode the Serial 1 (UART1) interface will be used before the Serial
2 (UART2) interface.
Issuing Interface UART1 State UART2 State Results
Wireless or Ethernet
Interface
CLI CLI No data bridge formed.
Listen CLI Data bridge formed on UART1.
Pass CLI No data bridge formed.
CLI Listen Data bridge formed on UART2.
Listen Listen Data bridge formed on UART1.
Pass Listen Data bridge formed on UART2.
CLI Pass No data bridge formed.
Listen Pass Data bridge formed on UART1.
Pass Pass No data bridge formed.