B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 186)

186 Airborne Enterprise CLI Reference Manual
putexpect-p2
Command putexpect-p2
Arguments [integer1] [integer2] [ASCHEX1] [ASCHEX2]
Security
Level
2 (data)
Device Type All
Default
Description Performs a binary data transfer to a target server or to the CLI Session on the Serial 2 (UART2)
interface.
The operation waits for bytes of returned data or times out after seconds or the
terminator is recognized.
Excess bytes are discarded. After the command completes, the connection remains in CLI Mode.
The command can be issued from a LAN application (serial in Listen Mode) or from a Serial Host
application.
integer1 Maximum number of bytes: range 0 – 1800
Integer2 Timeout in seconds. 32 bit unsigned.
ASCHEX1 Data to be sent, up to maximum length of the command line.
ASCHEX2 Terminator, up to 16 bytes in length.
putget
Command putget
Arguments [integer1] [integer2] [ASCHEX]
Security
Level
2 (data)
Device Type All
Default
Description Performs a binary data transfer to a target server or to the CLI Session on the Serial 1 (UART1)
interface.
The operation waits for bytes of returned data or times out after seconds.
Excess bytes are discarded. After the command completes, the connection remains in CLI Mode.
The command can be issued from a LAN application (serial in Listen Mode) or from a Serial Host
application.
integer1 Maximum number of bytes: range 0 – 1800
Integer2 Timeout in seconds. 32 bit unsigned.
ASCHEX Data to be sent, up to maximum length of the command line.