B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 156)

156 Airborne Enterprise CLI Reference Manual
input-size / input-size-p1
Command input-size | input-size-p1
Arguments [Integer]
Security
Level
Read: 3 (config)
Write: 4 (OEM)
Device Type UART | Serial | Ethernet
Default 1460
Description Defines the serial input buffer size in bytes for serial port 1 (UART1). The input buffer size is the
threshold at which the buffer will be flushed through the TCP connection.
The size range is 1 – 1460 bytes.
If software flow control is enabled the size range is 5 – 1460 bytes.
Use of the –p1 suffix on the command is optional.
input-size-p2
Command input-size-p2
Arguments [Integer]
Security
Level Read: 3 (config)
Write: 4 (OEM)
Device Type UART | Serial | Ethernet
Default 1460
Description Defines the serial input buffer size in bytes for serial port 2 (UART2). The input buffer size is the
threshold at which the buffer will be flushed through the TCP connection.
The size range is 1 – 1460 bytes.
If software flow control is enabled the size range is 5 – 1460 bytes.