B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 217)

Airborne Enterprise CLI Reference Manual 217
wins-server1
Command wins-server1
Arguments [ASCII Text: IP Address]
Security
Level
3 (config)
Device Type All
Default 0.0.0.0
Description Configures the Primary WINS Server Address. This value is used for WINS lookups, if the lookup fails
using the value from dns-server1 or dns-server2. If the DHCP Client is enabled, the wins-
server1
value will be updated (if the DHCP Server provides one) during the DHCP cycle.
Default is 0.0.0.0.
wins-server2
Command wins-server2
Arguments [ASCII Text: IP Address]
Security
Level
3 (config)
Device Type All
Default 0.0.0.0
Description Configures the Secondary WINS Server Address. This value is used for WINS lookups, if the lookup fails
using the value from dns-server1 or dns-server2. If the DHCP Client is enabled, the wins-
server2
value will be updated (if the DHCP Server provides one) during the DHCP cycle.
Default is 0.0.0.0.