B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 168)

168 Airborne Enterprise CLI Reference Manual
modelname
Command modelname
Arguments none
Security
Level
0 (all)
Device Type All
Default
Description Displays the specific B&B Manufacturing Model Name of the module.
ntp-refresh
Command ntp-refresh
Arguments none
Security
Level
3 (config)
Device Type All
Default
Description Requests an immediate update from the configured Network Time Protocol server.
ntp-refresh-interval
Command ntp-refresh-interval
Arguments [Integer]
Security
Level 3 (config)
Device Type All
Default 0
Description Configures the Network Time Protocol Refresh Interval of the module.
This is the interval at which the module will attempt to resynchronize the system time with an external
network time server.
The valid range is 0 – 240 and is the number of hours between resynchronization attempts. Good
results can usually be had with an interval of 8 hours.
A value of 0 disables the NTP refresh function. The module must be restarted for this parameter to take
effect.